Engine Model: | KT38-C925 |
Engine Type: | 12 Cylinders, V Type |
Displacement: | 17.7 L |
Rated Speed: | 2100 RPM |
Rated Power / Speed: | 783 kW @ 2100 RPM |
Aspiration Method: | Turbocharged |
Emission Standard: | N/A |
Bore*Stroke: | 159 mm * 159 mm |
Packing Size(L*W*H): | N/A |
Weight, Net Dry: | 3606 kg |
Lead Time: | 15-30 Working Days |
Payment Terms: | T/T, L/C |
Introduction
Chongqing Cummins Engine Co., Ltd. (CCEC) KT38-C925 (2100 RPM) Industrial Engine is V type12-cylinder, 38 liters four-strokes engine with 159 mm (6.25 in) bore and 159 mm (6.25 in) stroke.
KT38-C925 Industrial Engine equipped with PT Fuel System, comes with turbocharger. The maximum power of the CCEC KT38-C925 industrial engine is 925 HP (690 kW) at 2100 RPM, and the maximum torque of the engine at 1300 RPM in this mode is 4095 N.m (3020 lb.ft). The Prime power of the CCEC KT38-C925 industrial engine is 780 HP (582 kW) at 1800 RPM, and the torque of the engine at 1800 RPM in this mode is 3089 N.m (2278 lb.ft).
To achieve different output, CCEC K38 series Industrial engine have three configurations which are turbocharged engine, turbocharge with water-air intercooler, turbocharge with air-air intercooler. In the detailed model name, code T means engine come with turbocharger, code single A means engine comes with water-air intercooler, and code double A means engine comes with air-air intercooler.
We provide industrial power pack solution that integrated with air intake, air exhaust, cooling system, control system, transmission and hydraulic accessories, We also supplying special products such as explosion proof engine, generator and water pump set, as well as ultra-low temperature condition engine power pack.
We provide full life cycle services for all customers, from design to power system supply, from installation to commissioning, from after-sales service training to spare parts supply, from trouble shooting to overhaul technical support.
Advantages of KT38-C925 Industrial Engine
- Advanced design and sophisticated manufacturing to adapt to various harsh working conditions! High-strength parts, strong ability to work under heavy loads.
- Cylinder block and cylinder head adopt integrated design. The occurrence of engine water leakage and oil leakage is prevented, and the parts are about 40% less than other similar engines. The failure rate is greatly reduced.
- Using forged steel camshaft and crankshaft, high-strength cylinder block design, multiple parts cast on the cylinder block, high rigidity, high pressure resistance, good reliability, and longer service life.
- The cylinder bore adopts a platform mesh honing design. The perfect geometric structure effectively prevents oil leakage, and the use of advanced technology such as new piston ring components and gasket crimping and molding reduces oil loss.
- The five key systems of the electronically controlled engine are all developed by DCEC, and have been applied and verified in different fields around the world to ensure the excellent economy and reliability of the product.
- By optimizing the control strategy and combining with the actual operating conditions of the equipment, the fuel economy can be further improved.
Engine Model: | Rated Power | Aspiration | Curve & Datasheet | Compression Ratio | Fuel System |
KT38-C925 | 690 kW @ 2100 RPM | Turbocharged | C-602 | N/A | PT |
KTA38-C1100 | 821 kW @ 1800 RPM | Turbocharged | C-616 | 14.5 : 1 | PT |
KTA38-C/P/L1050 | 783 kW @ 2100 RPM | Turbocharged | C-4417-A | 13.8 : 1 | PT |
General Infomation of CCEC KT38-C925 Industrial Engine | |
Engine Model | KT38-C925 |
Maxi. Rating | 590 kW @ 2100 RPM |
Curve & Datasheet | C-602 |
Compression Ratio | N/A |
Type | 12 Cylinders, V Type |
Fuel System | PT |
Aspiration | Turbocharged |
Packing Size(L*W*H) | N/A |
Configuration | C-4414-A |
CPL Code Revision | 0810 |
Firing Order | 1-5-3-6-2-4 |
Standby Power | 582 kW @1800 RPM |
Emission Standard | N/A |
Peak Torque | 4095 N.m / 1300 RPM |
Displacement | 37.7 L |
Bore*Stroke | 159 mm × 159 mm |
Dry Weight (Fan Hub to Flywheel Engine) | 3606 kg |
Wet Weight (Fan Hub to Flywheel Engine) | 4016 kg |
Idle Speed | 625 RPM |
Crankshaft Thrust Bearing Load — Maximum Continuous | 4448 N |
Maximum No-Load Governed Speed | 2400 RPM |
Maximum Allowable Power From Front of Crankshaft | N/A |
Crankshaft Thrust Bearing Load — Maximum Intermittent | 8896 N |
Maximum Allowable Power From Accessory Drive | 6 kW |
Estimated Free Field Sound Pressure Level— Right Side (At 50 ft(15m) and Full Load Governed Speed (Excludes Noise From Intake. Exhaust. Cooling System and Driven Components) | 82 dBA |
Estimated Free Field Sound Pressure Level— Left Side (At 50 ft(15m) and Full Load Governed Speed (Excludes Noise From Intake. Exhaust. Cooling System and Driven Components) | 84.5 dBA |
Estimated Free Field Sound Pressure Level— Front (At 50 ft(15m) and Full Load Governed Speed (Excludes Noise From Intake. Exhaust. Cooling System and Driven Components) | 84 dBA |
Estimated Free Field Sound Pressure Level— after side (At 50 ft(15m) and Full Load Governed Speed (Excludes Noise From Intake. Exhaust. Cooling System and Driven Components) | N/A |
Engine Performance Data CCEC KT38-C925 Industrial Engine | ||||
Max. Power Point | Max. Peak Torque | Continuous Power Point | Continuous Peak Torque | |
Engine speed (RPM) | 2100 | 1300 | 1800 | N/A |
Output power (kW) | 925 | 558 | 582 | N/A |
Torque (N·m) | 3136 | 4095 | 3089 | N/A |
Fuel Line Rated Point Pressure (kPa) | 1151 | 800 | 813 | N/A |
Intake Manifold Pressure (kPa) | 176 | 111 | 132 | N/A |
Mean Effective Pressure (kPa) | 1048 | 1365 | 1027 | N/A |
Average Piston Speed (m/s) | 11 | 6.8 | 9.5 | N/A |
Friction Power (kW) | 137 | 43 | 87 | N/A |
Inlet Flow (l/s) | 1133 | 675 | 939 | N/A |
Dry Exhaust Pipe-Extraction Flow (l/s) | 2799 | 1908 | 2280 | N/A |
Dry Exhaust Pipe-Discharge Temperature (℃) | 475 | 583 | 462 | N/A |
Dry Exhaust Pipe-Ambient Heat Dissipation (kW) | 110 | 86 | 88 | N/A |
Dry Exhaust Pipe-Heat Dissipation Of Coolant (kW) | 419 | 336 | 338 | N/A |
Engine Cooling Water Flow (l/s) | 30 | 19 | 26 | N/A |
System Technical Data of CCEC KT38-C925 Industrial Engine | ||
Exhaust System | Maximum Allowable Back Pressure | 10 kPa |
Recommended Exhaust Piping Size (Inner Diameter) | 152 mm | |
Air Intake System | Maximum Intake Resistance For Light Duty Dry Air Filters— Clean Element | 3.74 kPa |
Maximum Intake Resistance For Light Duty Dry Air Filters— Dirty Element | 6.23 kPa | |
Minimum Ash Storage Capacity Of Lightweight Air Filters | 53 g/L/s | |
Lubrication System | Nominal Operating Oil Pressure — Idle Speed | 138 kPa |
Nominal Operating Oil Pressure — Rated Speed | 310-448 kPa | |
Oil Flow at Rated Speed | 469.4 L/min | |
Maximum Allowable Oil Temperature | 124 ℃ | |
Cooling System | Water Capacity Of Engine Internal Coolant | 118 L |
Maximum Engine External Cooling Water Resistance | 34.5 kPa | |
The Maximum Cooling Water Drop Above The Engine Crankshaft Centerline | 7.6 m | |
Standard Thermostat Temperature Range | 80-90 ℃ | |
Maximum Cooling Water Pressure (Except Pressure Cap) | 241 kPa | |
The Minimum Allowable Pressure Of The Pressure Cap | 48 kPa | |
Maximum Temperature Allowed In The Top Tank | 93.3 ℃ | |
Minimum Recommended Temperature For Top Tank | 71.1 ℃ | |
The Minimum Allowable Water Refill Rate | 18.9 L/min | |
The Maximum Initial Water Refill Time Allowed | 5 min | |
The Minimum Allowable Cooling Water Expansion Volume Occupies The System Volume | 5% | |
Maximum Allowed Exhaust Time | 25 min | |
Minimum Coolant Level Reduction Volume Allowed | 20.8 L |
Scopes of Supply of CCEC KT38-C925 Industrial Engine | |
Fuel System | Fuel Transfer Pump |
High-Pressure Fuel Pump | |
Fuel Filter | |
Exhaust System | Exhaust Manifold |
Turbocharger | |
Exhaust Elbow | |
Air Intake System | Air Intake Manifold |
Starting System | Starter Motor |
Starter Rely | |
Cooling System | Water Pump |
Engine Fan | |
Standard Radiator | |
Power Output System | Flywheel |
Standard Flywheel Housing | |
Lubricating System | Oil Pump |
Oil Filter | |
Charging System | Charging Alternator |
Engine Shut-Down System | Engine Fuel Shut-Off Solenoid |
Engine Mounting System | Engine Mounting Bracket |
Engine Auxiliary Accessories | Air Compressor |
Optional Accessories of CCEC KT38-C925 Industrial Engine | |
Air Intake System | Air Intake Pre-Heater |
Air Intake Shut-Off Valve | |
Air Filter | |
Air Intake Pre-Filter | |
Air Filter Alarm System | |
Exhaust System | Muffler & Bellows |
Flame Trap | |
Spark Arrestor Type Muffler & Bellows | |
Dpf System | |
Fuel System | Coarse Filter |
Fuel Pre-Heater | |
Lubricating System | Oil Pre-Heater |
Starting System | Manual Magnetic Dc Contactor |
Dual Ears Flywheel Housing | |
Spring Starter Motor | |
Air Starter Motor | |
Hydraulic Starter Motor | |
Manual Magnetic Dc Contactor | |
Cooling System | Silent Type Radiator |
Plateau Radiator | |
Salt-Spray Resistant Radiator | |
Coolant Pre-Heater | |
Jacket Water Heater | |
Engine Auxiliary Accessories | Hydraulic Oil Pump |
Air Conditioner Compressor | |
Control System | Option for Engine Monitoring System, Control System with Wiring Harness |
Option for Self-Protection System that Integrated with Alarm System | |
Power Output System | Clutch |
Engine Mounting System | Shock Absorber Pad |
Modifiable Components of CCEC KT38-C925 Industrial Engine | |
Air Intake System | Installation Position of Air Filter |
Upgrade to Heavy-Duty Type Air Filter | |
Charging System | 12V Charging Alternator for 12v Electric System |
Explosion-Proof Charging Alternator | |
Upgrading to Specified Brand and Specifications of Charging Alternator | |
Exhaust System | Water-Cooled Exhaust Manifold |
Water-Cooled Turbocharger | |
Modify Option for Installation Position and Direction of Turbocharger | |
Lubricating System | Oil Pan Position |
Number of Dipstick | |
Position of Dipstick Can Choose from 6 Positions | |
Modify Option for Oil Filter to be Remote Installation | |
Engine Shut-Down System | 12V Solenoid for 12V Electric System |
Explosion-Proof Solenoid | |
Starting System | Upgrading to Specified Brand and Specifications of Starter Motor |
12V Starter Motor for 12V Electric System | |
Fuel System | Upgrade to Fuel Filter that Integrated with Fuel Transfer Pump and Fuel Pre-Heater |
Engine Auxiliary Accessories | All of Auxiliary System can Choose Specified Brands and Specifications |
Additional Auxiliary Systems Can be Added for Special Applications | |
Cooling System | Modify Option for Engine Fan Into Blower Fan or Suction Fan |
Modify Option Central Position of Engine Cooling Fan | |
Option for Type of Engine Fan From Mechanical Type or Electric | |
Power Output System | Modify Option for Size of Flywheel Housing and Flywheel |
Dual-Ear Flywheel Housing (For Twin-Starter System) | |
Some of Models can Modify Flywheel Housing Into PTO Integrated Type | |
Engine Have Connecting Port of PTOs, That Able to Provide Power Output | |
Engine Mounting System | Modify Option for Engine Mounting Bracket |
***Note: All Above Data are Just for Reference, All Data Might Change Without Notices or Updates, Please Contact Our Sales Team to Confirm All Details Via WhatsApp or Email.